TOPIC:
Building a grow box for bonsai in training 4 years 10 months ago #50111
- Clicio
-
Topic Author
- Offline
- Platinum Member
-
- Posts: 3555
- Thanks received: 1549
A very simple grow box made to last 3 years.
Total cost:€ 12
Material used: 6 pieces of stained pinus planks, cut 40x40cm, steel screws, plastic draining mesh.
Screw in the 4 sides of the box. Screw in the bottom planks. Add 2 feet to lift the box from the ground.
Staple the mesh to the bottom of the box.
Attention: heavy duty Japanese mesh was used, from Daiso
Bottom with feet.
Not beautiful, but works very well.
Side note: When one has free time on Saturday it's good to build some useful tools. At least I like it.
Total cost:€ 12
Material used: 6 pieces of stained pinus planks, cut 40x40cm, steel screws, plastic draining mesh.
Screw in the 4 sides of the box. Screw in the bottom planks. Add 2 feet to lift the box from the ground.
Staple the mesh to the bottom of the box.
Attention: heavy duty Japanese mesh was used, from Daiso
Bottom with feet.
Not beautiful, but works very well.
Side note: When one has free time on Saturday it's good to build some useful tools. At least I like it.
